update at 2026-10-12 16:25:51
This commit is contained in:
99
fiber_delay_sim/tests/test_m2_m4.py
Normal file
99
fiber_delay_sim/tests/test_m2_m4.py
Normal file
@@ -0,0 +1,99 @@
|
||||
"""M2/M3/M4 验收测试(docs/实现方案.md §11–§12)。"""
|
||||
|
||||
import numpy as np
|
||||
import pytest
|
||||
|
||||
from fiber_delay_sim import pipeline
|
||||
from fiber_delay_sim.core import acquisition, calibration, fitting, signal, statistics
|
||||
|
||||
|
||||
# ---------- M2:四通道误差注入与校准 ----------
|
||||
|
||||
def test_multi_channel_phase_grid():
|
||||
"""四通道理想延时:等效时间网格应为 0/2.5/5/7.5 ns(+10ns 周期重复)。"""
|
||||
t_cont = np.arange(0.0, 400.0, 0.01)
|
||||
y_cont = signal.generate(t_cont, signal.PRESETS["single"])
|
||||
rng = np.random.default_rng(1)
|
||||
acq = acquisition.run_multi_channel(t_cont, y_cont, {
|
||||
"delays": [0.0, 47.5, 95.0, 142.5],
|
||||
"dt_ns": 10.0, "window_ns": 400.0, "snr_db": None, "bits": None,
|
||||
}, rng)
|
||||
assert acq["n_channels"] == 4
|
||||
assert acq["n_samples"] == 40
|
||||
# 等效时间 = t_adc − delay(含负值,应过滤)
|
||||
cal = calibration.calibrate_channels(acq["channels"], 10.0, method="nominal")
|
||||
assert cal["n_points"] > 0
|
||||
phases = np.unique(np.round(cal["t_rebuilt"] % 10.0, 6))
|
||||
# 应覆盖 0/2.5/5/7.5 四个相位(±0.1 容差,考虑尾部裁剪)
|
||||
expected = {0.0, 2.5, 5.0, 7.5}
|
||||
found = {float(p) for p in phases if p < 10}
|
||||
assert expected <= found or len(expected & found) >= 4
|
||||
|
||||
|
||||
def test_m2_calibration_improves_fit():
|
||||
"""M2 验收:注入误差后,完整校准比不校准的(1)重建曲线更连续、(2)τ̂ 有界。"""
|
||||
rec = pipeline.run_m2({"snr_db": 60.0, "bits": 14}, seed=42)
|
||||
j_raw = rec["raw"]["continuity"]["mean_jump"]
|
||||
j_cal = rec["calibrated"]["continuity"]["mean_jump"]
|
||||
assert j_cal < j_raw # 校准消除通道断层(连续度改善)
|
||||
err = abs(rec["calibrated"]["tau_hat"] - rec["tau_true"]) / rec["tau_true"]
|
||||
assert err < 0.05
|
||||
assert rec["calibrated"]["tau_hat"] is not None
|
||||
|
||||
|
||||
def test_m2_zero_error_ideal():
|
||||
"""零误差 + 理想条件:不校准(raw)也应精确恢复设定寿命(真值基线天然为 0)。"""
|
||||
rec = pipeline.run_m2({"gain_errors": [0.0] * 4, "delay_errors": [0.0] * 4,
|
||||
"baselines": [0.0] * 4, "calib_residual_ns": 0.0,
|
||||
"snr_db": None, "bits": None}, seed=3)
|
||||
d_raw = abs(rec["raw"]["tau_hat"] - rec["tau_true"]) / rec["tau_true"]
|
||||
assert d_raw < 1e-6
|
||||
|
||||
|
||||
def test_m3_algorithms_on_noisy_data():
|
||||
"""三档 SNR 下:NLS 有界(<5%);默认"尾段估基线"的对数线性因基线误差显著劣于 NLS。"""
|
||||
t = np.arange(0.0, 400.0, 10.0)
|
||||
for snr in (30.0, 50.0, 70.0):
|
||||
errs_nls, errs_ll = [], []
|
||||
for s in range(8):
|
||||
rng = np.random.default_rng(s)
|
||||
y = np.exp(-t / 52.8)
|
||||
sigma = np.max(y) * 10 ** (-snr / 20)
|
||||
yn = y + rng.normal(0, sigma, len(t))
|
||||
r_nls = fitting.fit_single_exp_nls(t, yn)
|
||||
errs_nls.append(abs(r_nls["tau"] - 52.8) / 52.8)
|
||||
r_ll = fitting.fit_log_linear(t, yn) # 默认尾段估基线(学生常规操作)
|
||||
if r_ll["tau"]:
|
||||
errs_ll.append(abs(r_ll["tau"] - 52.8) / 52.8)
|
||||
assert np.mean(errs_nls) < 0.05 # NLS 稳健
|
||||
assert len(errs_ll) > 0
|
||||
assert np.mean(errs_ll) > np.mean(errs_nls) # 估基线 → 对数线性系统偏差
|
||||
|
||||
|
||||
# ---------- M4:单通道 vs 四相位蒙特卡洛 ----------
|
||||
|
||||
def test_m4_single_vs_fiber_relstd():
|
||||
"""M4 验收:四相位等效采样 τ₂ 相对标准差应显著低于单通道(复现原项目量级)。"""
|
||||
cmp = pipeline.run_m4_compare(repeats=40, seed=0, snr_db=50.0)
|
||||
s, f = cmp["single"]["rel_std"], cmp["fiber"]["rel_std"]
|
||||
assert s is not None and f is not None
|
||||
assert f < s * 0.5 # 精度提升至少一半以上
|
||||
assert f < 0.02 # 四相位 τ₂ 相对标准差应 < 2%
|
||||
print(f"[M4] 单通道 rel_std={s:.3%} vs 四相位={f:.3%}")
|
||||
|
||||
|
||||
def test_m4_failure_rate_drops():
|
||||
"""失败率(|Δτ/τ|>5%)应在四相位下显著降低。"""
|
||||
cmp = pipeline.run_m4_compare(repeats=40, seed=1, snr_db=40.0)
|
||||
fr_s = cmp["single"]["failure_rate"]
|
||||
fr_f = cmp["fiber"]["failure_rate"]
|
||||
assert fr_f <= fr_s
|
||||
|
||||
|
||||
def test_statistics_confidence_interval():
|
||||
"""置信区间:已知真值应落在 95% CI 附近(教学正态近似)。"""
|
||||
rng = np.random.default_rng(0)
|
||||
vals = rng.normal(52.8, 0.5, 200)
|
||||
ci = statistics.confidence_interval(vals)
|
||||
assert abs(ci["mean"] - 52.8) < 0.15
|
||||
assert ci["ci_lo"] < 52.8 < ci["ci_hi"]
|
||||
Reference in New Issue
Block a user