"""M2 实验:四通道误差注入与校准(raw / 基线+增益校准 / 完整校准 三方案对比)。 运行:python -m fiber_delay_sim.experiments.exp03_m2_calibration [--seed 42] """ import argparse import numpy as np from .. import pipeline from ..export import record from ._plot import setup_style def run(seed=42, runs_dir="runs"): plt = setup_style() rec = pipeline.run_m2({"snr_db": 60.0, "bits": 14}, seed=seed) tau_true = rec["tau_true"] # ---------- 图 1:三方案重建曲线 vs 理论 ---------- fig, ax = plt.subplots(figsize=(8, 4.6)) schemes = [("raw", "不校准", "#C25B2A", "o"), ("nominal", "基线+增益校准", "#6B2A35", "s"), ("calibrated", "完整校准", "#2D5F8A", "^")] for key, label, color, mk in schemes: d = rec[key] ax.plot(d["t"], d["y"], mk, ms=3, color=color, label=label, alpha=0.75) t_th = np.arange(0, 400, 0.5) ax.plot(t_th, np.exp(-t_th / tau_true), "k-", lw=1.2, label=f"理论 I(t)=e^(−t/{tau_true:g})") ax.set_xlim(0, 180) ax.set_xlabel("等效时间 u (ns)") ax.set_ylabel("归一化强度") ax.set_title("M2:误差注入后三种处理方案的重建曲线(0–180 ns)") ax.legend(fontsize=9) ax.grid(alpha=0.3) # ---------- 图 2:连续度与 τ̂ 对比柱状 ---------- fig2, axes = plt.subplots(1, 2, figsize=(8.5, 3.8)) names = ["raw", "nominal", "calibrated"] labels = ["不校准", "基线+增益", "完整校准"] jumps = [rec[n]["continuity"]["mean_jump"] for n in names] errs = [abs(rec[n]["tau_hat"] - tau_true) / tau_true * 100 for n in names] axes[0].bar(labels, jumps, color=["#C25B2A", "#6B2A35", "#2D5F8A"]) axes[0].set_ylabel("重建连续度 mean_jump") axes[0].set_title("校准降低通道断层") axes[1].bar(labels, errs, color=["#C25B2A", "#6B2A35", "#2D5F8A"]) axes[1].set_ylabel("|τ̂−τ|/τ (%)") axes[1].set_title(f"寿命拟合偏差(真值 {tau_true} ns)") for ax2 in axes: ax2.grid(alpha=0.3, axis="y") print(f"\n=== M2 三方案对比(真值 τ = {tau_true} ns)===") print(f"{'方案':<12} {'τ̂(ns)':>10} {'偏差%':>8} {'点数':>6} {'连续度(mean)':>12}") for key, label in zip(names, labels): d = rec[key] err = abs(d["tau_hat"] - tau_true) / tau_true * 100 if d["tau_hat"] else float("nan") print(f"{label:<12} {d['tau_hat']:>10.4f} {err:>8.2f} {d['n_points']:>6d} " f"{d['continuity']['mean_jump']:>12.5f}") print(f"完整校准系数:增益={[round(g, 3) for g in rec['calibrated']['gains']]}") print(f"基线(相对峰值)={[round(b, 4) for b in rec['calibrated']['baselines']]}") print(f"延时估计(ns)={[round(d, 3) for d in rec['calibrated']['delay_est_ns']]}") run_dir = record.save_run( runs_dir, "exp03_m2_calibration", records=[rec], figures=[("fig1_reconstruction", fig), ("fig2_compare", fig2)], notes=("M2 校准对比:raw / 基线+增益校准 / 完整校准。" "校准价值体现在重建曲线连续度与 τ̂ 有界性;" "延时常数错位不改变单指数拟合的 τ(被幅度自由度吸收)——教学点。"), seed=seed) print(f"\n[M2] 记录包:{run_dir}") return run_dir if __name__ == "__main__": ap = argparse.ArgumentParser() ap.add_argument("--seed", type=int, default=42) ap.add_argument("--runs-dir", default="runs") a = ap.parse_args() run(seed=a.seed, runs_dir=a.runs_dir)