Files
chenproject/fiber_delay_sim/experiments/exp03_m2_calibration.py
2026-10-12 16:25:51 +08:00

80 lines
3.5 KiB
Python
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

"""M2 实验:四通道误差注入与校准(raw / 基线+增益校准 / 完整校准 三方案对比)。
运行:python -m fiber_delay_sim.experiments.exp03_m2_calibration [--seed 42]
"""
import argparse
import numpy as np
from .. import pipeline
from ..export import record
from ._plot import setup_style
def run(seed=42, runs_dir="runs"):
plt = setup_style()
rec = pipeline.run_m2({"snr_db": 60.0, "bits": 14}, seed=seed)
tau_true = rec["tau_true"]
# ---------- 图 1:三方案重建曲线 vs 理论 ----------
fig, ax = plt.subplots(figsize=(8, 4.6))
schemes = [("raw", "不校准", "#C25B2A", "o"),
("nominal", "基线+增益校准", "#6B2A35", "s"),
("calibrated", "完整校准", "#2D5F8A", "^")]
for key, label, color, mk in schemes:
d = rec[key]
ax.plot(d["t"], d["y"], mk, ms=3, color=color, label=label, alpha=0.75)
t_th = np.arange(0, 400, 0.5)
ax.plot(t_th, np.exp(-t_th / tau_true), "k-", lw=1.2,
label=f"理论 I(t)=e^(−t/{tau_true:g})")
ax.set_xlim(0, 180)
ax.set_xlabel("等效时间 u (ns)")
ax.set_ylabel("归一化强度")
ax.set_title("M2:误差注入后三种处理方案的重建曲线(0–180 ns)")
ax.legend(fontsize=9)
ax.grid(alpha=0.3)
# ---------- 图 2:连续度与 τ̂ 对比柱状 ----------
fig2, axes = plt.subplots(1, 2, figsize=(8.5, 3.8))
names = ["raw", "nominal", "calibrated"]
labels = ["不校准", "基线+增益", "完整校准"]
jumps = [rec[n]["continuity"]["mean_jump"] for n in names]
errs = [abs(rec[n]["tau_hat"] - tau_true) / tau_true * 100 for n in names]
axes[0].bar(labels, jumps, color=["#C25B2A", "#6B2A35", "#2D5F8A"])
axes[0].set_ylabel("重建连续度 mean_jump")
axes[0].set_title("校准降低通道断层")
axes[1].bar(labels, errs, color=["#C25B2A", "#6B2A35", "#2D5F8A"])
axes[1].set_ylabel("|τ̂−τ|/τ (%)")
axes[1].set_title(f"寿命拟合偏差(真值 {tau_true} ns)")
for ax2 in axes:
ax2.grid(alpha=0.3, axis="y")
print(f"\n=== M2 三方案对比(真值 τ = {tau_true} ns)===")
print(f"{'方案':<12} {'τ̂(ns)':>10} {'偏差%':>8} {'点数':>6} {'连续度(mean)':>12}")
for key, label in zip(names, labels):
d = rec[key]
err = abs(d["tau_hat"] - tau_true) / tau_true * 100 if d["tau_hat"] else float("nan")
print(f"{label:<12} {d['tau_hat']:>10.4f} {err:>8.2f} {d['n_points']:>6d} "
f"{d['continuity']['mean_jump']:>12.5f}")
print(f"完整校准系数:增益={[round(g, 3) for g in rec['calibrated']['gains']]}")
print(f"基线(相对峰值)={[round(b, 4) for b in rec['calibrated']['baselines']]}")
print(f"延时估计(ns)={[round(d, 3) for d in rec['calibrated']['delay_est_ns']]}")
run_dir = record.save_run(
runs_dir, "exp03_m2_calibration", records=[rec],
figures=[("fig1_reconstruction", fig), ("fig2_compare", fig2)],
notes=("M2 校准对比:raw / 基线+增益校准 / 完整校准。"
"校准价值体现在重建曲线连续度与 τ̂ 有界性;"
"延时常数错位不改变单指数拟合的 τ(被幅度自由度吸收)——教学点。"),
seed=seed)
print(f"\n[M2] 记录包:{run_dir}")
return run_dir
if __name__ == "__main__":
ap = argparse.ArgumentParser()
ap.add_argument("--seed", type=int, default=42)
ap.add_argument("--runs-dir", default="runs")
a = ap.parse_args()
run(seed=a.seed, runs_dir=a.runs_dir)